View/Change Diagram

911 Turbo/GT2 2001-05 - Fuel/Exhaust

View/Change Diagram

911 Turbo/GT2 2001-05 - Fuel/Exhaust

Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.

Some models require oxygen sensor relocation.

Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s

Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)

General Fitment

Designed to prolong the life of your turbocharger, this greddy turbo timer allows your Porsche to idle the engine for a timed period, with the ignition key removed. This conveniently allows the engine oil and turbo center cartridge to cool down properly and prolong turbo and oil life. The run time can be programmed by the user or utilize it’s “full auto mode”, which estimate the driving rpm according to the vehicle’s alternator signal and then recommend a count down time. To prevent theft, the unit includes a parking brake and speedo hook-up which disengage operation if there is an attempt to move the vehicle without the key. The unit also includes a stopwatch/lap timer and attack modes along with a bui...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks can be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
Sprung hub/cu...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)

General Fitment

The intercooler cores used in this product are of the most advanced design currently produced anywhere in the world. These cores are manufactured by the aerospace company that is currently producing the majority of cooling for formula 1 cars and lead the way in automotive heat exchangers.

The plate and fin design that has been applied to these Porsche 997.1 turbo intercoolers has been designed to allow the minimum pressure drop while shifting the maximum amount of heat in to the received air flow.

Standard extruded tube intercoolers will give reasonable heat dissipation when the internal fin is packed on a vehicle of this power however this will always lead to a high pressure drop and as such not truly ai...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
S...(choose a part on the right to read more)

General Fitment

Kit includes:
Software dme, sport air filter, sport header system.

Some models require oxygen sensor relocation.

Please note: this dme cannot be flashloaded. Dme must be sent to us.

Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s

Tuning:
Max. Power - 162kw (220hp) @ 6000rpm
Max. Torque - 270nm (199lbf ft) @ 5500rpm
Max. Speed - 251km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.6s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep u...(choose a part on the right to read more)

General Fitment

K-16/24 turbo (up to 555hp)

Power is focused on low and mid range rpm?s.

Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced


FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.

The remanufacturing process starts with re-pro...(choose a part on the right to read more)

General Fitment

K-16/24 turbo (up to 555hp)

Power is focused on low and mid range rpm?s.

Facts:
Larger compressor wheel with extended tip. 47.5mm inducer diameter.
Cnc modified compressor housing
Modified and improved back plane
Uprated staggered gap turbine
Uprated thrust bearing
Modified wheel to reduce backpressure
Balancing of all components
Factory vacuum unit
New bearings and seals
All parts are reconditioned and balanced

FVD brombachers 993 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.

The remanufacturing process starts with re-profi...(choose a part on the right to read more)

General Fitment

Special intake hose kit for enhanced performance vehicles.

The original plastic tubes are restrictive on one side and have different lengths. Our reinforced suction hoses kit replaces the narrow and different lengths plastic tubes. This is a perfect homogeneous intake air guide from the intake manifold to the turbocharger and provides a smooth power delivery.

Design to withstand the vacuum pressure and will not collapse.

Made for the 993 GT2 racecars.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Kit includes:
Software (fast load), FVD TUV muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.

Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s

In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.

We program our ecu's with the following modifications in mind:
Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition timi...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)

General Fitment

Kit includes:
Software dme exch., sport air filter

Please note: this dme cannot be flashloaded. Dme must be sent to us.

Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s

Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our en...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable), sport air filter, sport header system.

Some models require oxygen sensor relocation.

Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s

Tuning:
Max. Power - 178kw (242hp) @ 6500rpm
Max. Torque - 290nm (214lbf ft) @ 5000rpm
Max. Speed - 261km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.3s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine...(choose a part on the right to read more)

General Fitment

Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s

Tuning:
Max. Power - 158kw (215hp) @ 6000rpm
Max. Torque - 260nm (192lbf ft) @ 4500rpm
Max. Speed - 247km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.7s

Please note: this dme cannot be flashloaded. Dme must be sent to us.

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we have perfec...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable), power-flow kit, sport header system and sportmuffler (2x90mm tips).

Some models require oxygen sensor relocation.

Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s

Tuning:
Max. Power - 206kw (280hp) @ 6400rpm
Max. Torque - 345nm (254lbf ft) @ 4900rpm
Max. Speed - 275km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.1s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding...(choose a part on the right to read more)

General Fitment

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche® engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche® engine naturally led to our engine management software. Over the years we have perfected the art of software tuning, making substantial gains in horsepower and torque, while retaining drivability and most importantly reliability.

Here is a small sample of our software advancements versus what is available on the market?

FVD software vs. The competition

- software programming can be done in the comfort and privacy of your own home or by one of our recommended dealers.
- you receive the FVD software file and the original (oem) software file f...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable), sport air filter and sport header system.

Some models require oxygen sensor relocation.

Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s

Tuning:
Max. Power - 200kw (272hp) @ 6400rpm
Max. Torque - 335nm (247lbf ft) @ 4900rpm
Max. Speed - 270km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.3s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche eng...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).

Some models require oxygen sensor relocation.

Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s

Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable) and sport air filter

Genuine:
Engine - 6 cylinder boxer
Capacity - 3179ccm
Compression ratio - 11,0:1
Max. Power - 185kw (252hp) @ 6250rpm
Max. Torque - 305nm (225lbf ft) @ 4500rpm
Max. Speed - 260km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 5.6s

Tuning:
Max. Power - 195kw (265hp) @ 6400rpm
Max. Torque - 325nm (240lbf ft) @ 4900rpm
Max. Speed - 267km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 5.4s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)

General Fitment

Kit includes:
Software (fast load), FVD TUV version sport muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.

Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s

In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.

FVD dme / ecu programming philosophy:

removal of the top speed limiter
increasing the rev limiter
modifying ignition timing...(choose a part on the right to read more)

General Fitment

Kit includes:

Software ecu software (flashclient cable) and sport air filter

Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s

Tuning:
Max. Power - 173kw (235hp) @ 6500rpm
Max. Torque - 280nm (207lbf ft) @ 4750rpm
Max. Speed - 257km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.4s

For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we ...(choose a part on the right to read more)

General Fitment

Kit includes:
Software ( fast load), FVD sound muffler (200 cell catalytics), sport headers, sport turbochargers, bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.

Tuning:
Max. Power - 448kw (610hp) @ 6000rpm
Max. Torque - 805nm (594lbf ft) @ 4750rpm
Max. Speed - 335km/h
Max. Rpm - 7100rpm
Acceleration 0-100km/h - 3.4s

In different situations with tiptronic cars the maximum power will be 580hp. But the maximum power of the engine stays at 610 hp. To protect the transmission the tiptronic dme will regulate the power to maximum 580 hp.

We program our ecu's with the following modifications in mind:

Removal of the top speed limiter
Increasing the rev limiter
Modifying ignition...(choose a part on the right to read more)

General Fitment